Ubiquiti NANOBEAM NBE-5AC-16

91.00 with VAT

Ubiquiti NANOBEAM NBE-5AC-16



Ubiquiti NanoBeam 5AC-16 / NBE-5AC-16

Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment), the NanoBeam 5AC-16. Using airMAX ac technology, the NBE 5AC-16 supports up to 450+ Mbps real TCP/IP throughput.

Improved Noise Immunity

The NanoBeam 5AC directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam 5AC blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

The radio and antenna are combined to create a more efficient and compact CPE. The NanoBeam 5AC-16 gets maximum gain out of the smallest footprint. Providing high performance and an innovative form factor, the NanoBeam 5AC-16 is versatile and cost-effective to deploy.

Advanced RF Analytics

airMAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry.

Compact and robust outdoor design

Very small visible footpint. Mechanical design provides complete weatherproof performance. Acitivity and signal strength LED’s provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments. The NanoBeam AC is designed for mast or pole installation.

airMAX Technology

The next generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti?s airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

airMAX ac supports high data rates, which require dense modulation: 256QAM ? a significant increase from 64QAM, which is used in airMAX. With their use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mbps real TCP/IP throughput ? up to triple the throughput of standard airMAX products.

U Mobile App

The NanoBeam 5AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Accessing airOS via Wi-Fi The U Mobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). U Mobile allows you to set up, configure, and manage the LiteBeam 5AC. It offers the following options once you’re connected or logged in to the device:

  • Status: Check link status information or the basic configuration settings of the NanoBeam 5AC-16.
  • Configuration: Change or update the existing configuration of the NanoBeam 5AC-16.
  • Tools: Access tools for initial installation and configuration of the NanoBeam 5AC-16.
  • Actions: Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the NanoBeam 5AC-16.

Passive PoE

Using PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the NanoBeam M5 AC to your network enviroment. There is no need to to install any extra wired power cord. A Gigabit 24V, PoE Injector is included.

AirOS Software

AirOS is the intuitive, versatile, highly developed Ubiquiti firmware technology. It is exceptionally intuitive and was designed to require no training operate. Behind the user webinterface is a powerful firmware architecture which enables hi-performance networking. Additionally, the AirControl application allows operators to centrally manage 100’s of devices.



Technical Datasheet 

AirOS V8.0 

AirOS V7.2 

AirOS V6.0 

AirOS V5.6 

Technical Data:

Manufacturer / Product: Ubiquiti Networks / NanoBeam 5AC-16
Processor Specs: Atheros MIPS 74Kc, 720 MHz
Memory Information: 128MB SDRAM, 8MB Flash
Operating System: AirOS
Networking Interface: 1 x 10/100/1000 BASE-TX (Cat. 5, RJ-45)
Frequency Band: Weltweit: 5150 – 5875 MHz
USA: 5725 – 5850 MHz
Supported Standards: IEEE 802.11a: 54MBit
IEEE 802.11n: 150MBit
airMAX ac: 450MBit
TX Power: max. 26dBm
RX Sensitivity: min. -96dBm
Range: 10+ km
TCP/IP Throughput: 450Mbps+
Antenna: 16dBi Dual-Linear Backfire Antenna
max. Power Consumption: 6 Watt
Power Method: Passive PoE
Gigabit PoE Injector is included!
Power Input: 12V – 24V (12 Watt)
ESD/EMP Protection: 24KV contact / Air for ethernet
Dimensions: 14 x 14 x 5.4cm
Weight: 0.320 kg
max. Wind Load 21.4 N @ 200 km/h
Operating Temperature: -40°C to +70°C
Operating Humidity: 5 to 95% non-condensing
Shock and Vibration: IEC 68-2-6, IEC 68-2-14


Scope of delivery:

1 x Ubiquiti NanoBeam 5AC-16
1 x 24V/0.5A – Gigabit PoE Injector
1 x Mounting Kit


There are no reviews yet.

Be the first to review “Ubiquiti NANOBEAM NBE-5AC-16”

Your email address will not be published. Required fields are marked *